Recommendations

The most common order options are 24" x 63" on 13 oz. Matte Vinyl. Almost always, X-Frame Banners print in full color on the front with no printing on the back (4/0).

To order additional banners for use with the stand that comes with the X-Frame with Banner, please check out X-Frame No Stand under Large Format.

Note:
Because of the wide potential size range of our large format products, there are additional file setup considerations. Proofs are typically shown half size. For other details, please review the file setup section carefully.

Due to material, all substrates may expand or shrink from batch to batch, which makes exact cuts very difficult. We do not recommend borders. If you would like borders, please make sure they are at least 2" thick. We will not reprint if the borders are not exactly the same on all sides after cutting.

Marketing Tips

X-Frame Banners with Stand are used anywhere you would like to display large format freestanding graphics. They are most often used where portability is a key consideration, such as at trade shows, seminars, and presentations. X-Frame Banners with Stand are also a good idea if you would like to move them around within your business environment. Consider using them for storefront displays to showcase a new product or special. Our Banners exhibit a wide color gamut, so they are great for colorful graphics. X-Frame Stands come in 3 sizes to accommodate any of the 3 X-Frame Banner sizes we offer.

Consider adding a QR code to your design to link directly to additional online information. This can be a great way to provide more detail than you would want to cram onto your Banners. Since a QR code can link to an online message, you can change the online message without the need to reprint the QR code.

4/0

Full color (cyan, magenta, yellow, and black as above) on the front and no printing on the back. A typical example of this is a poster.

No Lamination

This product prints in a professional, finished quality.

Next Day Turnaround

If you order a proof (Online PDF or Hard Copy Proof), your turnaround time begins as soon as you approve your proof in our system. If you order "No Proof, Run As Is" (only recommended if you are certain you want us to print what you sent as is), your turnaround time will be based on the guidelines listed below. Once your order is in imposition, you should receive an email with your estimated order completion date (does not include shipping or mailing).

Guidelines

Next Day Shipped Orders
Orders will ship the next business day if you follow the guidelines.

Files uploaded after the cut off time will be processed the following business day.

2-3 Day Turnaround

If you order a proof (Online PDF or Hard Copy Proof), your turnaround time begins as soon as you approve your proof in our system. If you order "No Proof, Run As Is" (only recommended if you are certain you want us to print what you sent as is), your turnaround time will be based on the guidelines listed below. Once your order is in imposition, you should receive an email with your estimated order completion date (does not include shipping or mailing).

Guidelines

2-3 Day Shipped Orders
Orders will ship between 2 business days after 4:00 p.m. and 3 business days if you follow the guidelines.

Files uploaded after the cut off time will be processed the following business day.

File Preparation

In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file. Click here to see our preferred PDF settings.

We also accept .JPG (JPEG), .EPS and .TIF (TIFF) file types, however PDF is the preferred format.

Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results.

1. Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.


2. Use a minimum resolution of 150 dpi. You may also choose to submit your file at half-size. Any files uploaded at half-size require 300 dpi.


3. All fonts need to be outlined or embedded. For more information on fonts, please Click Here


4. Specify trim area with crop marks. (Don't place crop marks inside the work area.) For more information on crop marks, please Click Here


5. Artwork should have 1" bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge. For more information on bleed, please Click Here


6. Safe Area is the 1" area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge. For more information on safe area, please Click Here


7. Large Format printed borders can go all the way to the trim line, so long as they include full bleed.For more information on borders, please Click Here

For detailed information about advanced file setup, Click Here

File Orientation

Please click the link below for an explanation of file orientation.

View File Orientation

Bleed and Safe Area

We require that you extend any images that run up to the trim line a minimum of 1" past the trim line to create "bleed". Depending on what program you use to create your file, this may or may not change the total image area of your file. Programs like Photoshop that do not allow the creation of "bleed" or the addition of crop marks will require an image area that is 2" larger than your desired final overall image area in both dimensions.

Safe Area is the 1" area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge. If you choose to make less than this minimum clearance, we will NOT be responsible for items that are cut off in this area.

For detailed information about advanced file setup, please Click Here

Proofs and File Check

Large Format proofs will be half-size and are available in the below options.

1. Online PDF Proof: You will be sent a link to view your proof via email. Please keep in mind that this is only a proof for content and positioning; the color on your screen may vary from the color of your final product, depending on your monitor and viewing conditions.


2. No Proof, Run As-Is: This option is for the industry professional who is certain their project is ready to hit the press and does not require the additional security of a proof.

File Check:

If our prepress department sees anything questionable with your file, we will contact you via email with our concerns. Should prepress email you, please note that your job is not considered fully submitted until you respond to this email. This should be factored into your turnaround time.

How to check your Online PDF:
The black crop marks indicate the final trim size. The Red line ( Dashed ) indicates the (Score) The Green line ( Dashed ) indicates the (Perf). The Red Line (Solid) indicates the ( Cut or Trim ) line. The verbiage on the file, this will indicate the page position after folding.

Please Note: The charge for our technical team to review your file when first submitted is included in the price of your order. If they note technical concerns with your file, they may email you with their concerns so you can upload a corrected file. If subsequent uploads still contain errors, you may be charged an additional prepress fee to review your file again.

For detailed information about advanced file setup, please Click Here